Tag Archives: 2010

Color Study Group, 2010

Lead by Meg Wilson

Our color study group begins with lessons on how to warp a loom. Come to Meg Wilson’s house on Thursday, August 14th at 7:00pm. We will warp at least 3 guild looms using different warping methods, putting on different color study warps. What we don’t get done on that Thursday, we will finish up on Saturday August 16 from 1-4 and August 23 from 1-4 if necessary. Everyone gets to weave a dish towel on one of the smaller table looms.  more pictures here

      

Spinning Bast Fibers, March 6, 2010

 

 

 

 

SPINNING BAST FIBERS

with Susan Fricks of Yarnorama

March 6, 2010, all day
Yarnorama in Paige

La Luz Color Challenge, 2010

Lead by Marie Carmel

Another Guild project this fall is a design challenge. We’re using some photos Marie’s brother took, as inspirational jumping off points.

         

And here are some of the pieces we made:

    

     

 

 

Collapse Weave, January 23-24, 2010

with Giovanna Imperia

January 23-24, 2010
Old Oaks Ranch in Wimberley

Skill level: intermediate (must know how to dress a loom, and basic structures; experience with fine yarns nice but not required)

In this workshop students will have an opportunity to experiment with a variety of elastic materials which cause a woven structure to collapse. In the process, students will gain an understanding of properties and capabilities of a variety of elastic materials such as overtwisted yarns (silk, rayon, wool) with Z and S twist, jump yarns — that is yarns plied with elastic materials such as Elite/Elastane. This will include viscose, silk, wool, polyester, metallic. In addition, students will have an opportunity to weave with pure Elastane as well as other collapsible materials such as stainless steel wool, silk, linen; copper yarn, and selected metallics.

To further understand elastic materials, students warps will consist of elastic and inelastic stripes (total warp width not to exceed 7; total warp length approx. 3 yards). Students will be required to portion of inelastic warp BEFORE coming to the workshop. Therefore, warps of appropriate materials will be provided ahead of time. This will include detailed instructions on how space the warp to ensure that room is left for the elastic stripes.

During the first day of the workshop, students will warp jump yarns and complete the warp. Instructions will be provided on how to handle the material and how to set up the warp on the loom.

At the end of the second day we will be able to evaluate the various samples. Please note that some materials will react only after washing. So, if possible, time should be set aside for wetting the samples.

Required equipment: 4 or 8 shafts loom, rigid heddle looms OK as long as it is possible to obtain an approx. 40 epi. Heddles must be: texsolv or flat steel. No twisted wire please. Reed: 15 preferred, but 12 OK. Second beam nice but not critical. Sectional beams not necessary.